Table of Contents
Advertisement
2
Select [Shoot]
press
.
[Auto attach loc. info]:
Select whether to add location information
automatically when saving an image.
[Attach loc. info meth.]:
S e l e c t a n o b t a i n i n g m e t h o d o f l o c a t i o n
information to be added automatically.
[Location info]:
Save location information to be added to an
image.
3
Select [ON]/[OFF] of whether to add
location information automatically at
[Auto attach loc. info].
4
Select [From saved info]/[From act.
camera] at [Attach loc. info meth.].
[From saved info]:
Add the location information saved in the
Location info.
[From act. camera]:
Obtain location information when activating the
camera and add it automatically.
5
Save location information at [Location
info].
Follow the same steps as in "Adding the Location
Information" (P.261, step 2 to 3).
When the location information is already saved
The Has loc. info display appears. To check the
location information, select [Check]. To change
the location information, select [Change] and
obtain location information. To delete the location
information, select [Delete].
6
Press
(Complete).
The Set attach loc. info is set.
When the Auto attach loc. info is set to [ON], the
Set attach loc. info is set and " " appears.
152
[Set attach loc. info] and
When the Auto attach loc. info is set to [ON], it
may take time to start next recording.
When the Auto attach loc. info is set to [ON] and
the Attach loc. info meth. is set to [From act.
camera], the icons which show the accuracy
appear in the Camera mode display (P.142).
When the Auto attach loc. info is set to [ON] and
the Attach loc. info meth. is set to [From act.
camera], even if the positioning is failed when
activating the camera, you can do it manually by
pressing
for over a second in the Camera
mode display.
The location information attached to an image
may have a large margin of error if you record it
right after the camera is activated or in a place
where it is difficult to obtain location information.
Using the Auto Timer
The Auto timer allows you to record yourself
or others without holding the FOMA terminal.
You can also set the interval until recording is
started after you press the shutter key.
1
Press
(Func) in the Camera mode
display, select [
2
Select [Shoot]
.
The menu for selecting a time for the Auto timer
appears.
3
Select a time until recording is started
after you press the shutter key and press
.
Select from [OFF], [10sec], [5sec], and [2sec].
The Auto timer is set and "
If there is an incoming call when you are
recording with the Auto timer, the recording
stops.
After recording, the Auto timer is automatically
reset to [OFF].
], and press
.
[Auto timer] and press
" appears.
Advertisement
Chapters
Table of Contents
