NTT docomo FOMA SO906i User Manual page 48

How to Charge the FOMA Terminal
Charge the battery pack using the optional Desktop Holder SO10 with the FOMA AC
Adapter 01/02 connected. Make sure to see the user's manuals of the Desktop Holder
and AC Adapter. The battery pack cannot be charged alone.
1
Insert the connector of the AC adapter
horizontally with the engraved side facing
up into the terminal (the side labeled "AC
") of the desktop holder.
2
Lift the power plug of the AC adapter and
plug it into an AC 100 V outlet.
3
Place the FOMA terminal with it folded,
which has the battery pack attached, to
the desktop holder while holding it.
Charging starts and the red charge indicator is
turned on. The indicator is turned off when charging
is completed.
When you charge while the FOMA terminal is
powered on
The battery level icon flashes and the Start
charge sound is heard. When charging is
completed, the icon changes from flashing to
lighting and the Full charge sound is heard.
 You can change or set to mute the Start charge
sound and Full charge sound at the Set basic
tone (P.104).
When there is missed information
The incoming indicator/charge indicator flashes
in the indicator color for missed information at
about five seconds interval while it is lighting
in red. Note that this is not a malfunction of the
battery pack.
4
When the charging is completed, lift to
remove the FOMA terminal while holding
the desktop holder.
5
Remove the power plug of the AC adapter
from the AC 100 V outlet.
Charging with the AC adapter only
Insert the connector
horizontally with the
engraved side facing up.
Release buttons
 To remove the AC adapter, make sure to
pull it horizontally while holding the release
buttons pressed. Pulling it forcibly may cause
malfunction.
46
Open the
terminal cover.
Insert the connector
horizontally with
the engraved side
facing outside.
Charge indicator
3
4
Charging with the DC adapter
With the optional FOMA DC Adapter 01/02,
you can charge the battery pack by using
the cigarette lighter socket of a vehicle
(12 V/24 V). For details, see the user's
manual of the DC adapter.
Insert the connector
horizontally with
the engraved
side facing up.
Open the
terminal cover.
Charge indicator
Connector
Terminal
1
AC adapter
2
5
AC adapter
Power
indicator
Plug