Table of Contents
Advertisement
4
Enter a dummy (nonexistent) phone number (such
as "0") at [
], select [FOMA SO906i] at [
], and click [OK].
The connection window appears.
5
Click [
].
Enter a host (APN) and press .
6
Input format
AT+CGDCONT=<cid>, "PPP", "APN"
Enter the registration number 2
or a number between 4 and 10.
If the AT command you entered is not displayed
Enter "ATE1 ".
When the host (APN) is set, "OK" appears.
7
Click the [
] menu
].
Hyper Terminal ends.
When the message "
" (The line is connected. Are you sure
you want to disconnect?) appears, select [
When using Windows XP, the message ""XXX"
the connection named "XXX"?) appears. You do not
need to save the connection.
When using Windows 2000, the message "
XXX
XXX?) appears. You do not need to save the session.
To reset a host (APN)
Input format
AT+CGDCONT= (Reset all cid)
AT+CGDCONT=<cid> (Reset a specific cid only)
To display a current host (APN)
Input format
AT+CGDCONT?
Enclose the host name you
enter in double quotes.
[
].
" (Do you want to save
" (Do you want to save session
Setting ON/OFF for the Notify Caller ID
The caller ID is important personal information.
Carefully decide whether you want to notify a recipient
of your caller ID.
The caller ID must be notified when you use "mopera U" or "mopera".
1
Perform step 1 to 5 in "Host (APN) Setting" (P.18).
2
Set ON/OFF for the Notify caller ID during packet communication.
Input format
AT DGPIR=<n>
1: Add "184" (OFF).
2: Add "186" (ON).
If the AT command you entered is not displayed
Enter "ATE1".
When ON/OFF for the Notify caller ID is set, "OK" appears.
ON/OFF setting of a dial-up network
You can add 186 (ON)/184 (OFF) to a host number
even for a dial-up network setting (P.19).
When this setting is performed by both
command and dial-up network setting, the following
parameters are used.
Dial-up network setting
(when <cid>=3)
99
3#
184 99
3#
186 99
3#
Dial-up Network Setting
When Using Windows XP
1
Click [
]
]
[
]
The new connection window appears.
2
Click [
].
3
Select [
4
Select [
5
Select [
and click [
].
6
Put a checkmark in the checkbox of [
SO906i] and click [
The window for selecting the device appears only when
there are several modems.
7
Enter any name at [ISP ] and click [
19
DGPIR
DGPIR command setting
No setting
OFF
ON
OFF
ON
OFF
ON
[
]
[
].
] and click [
] and click [
- FOMA
].
].
ON
[
].
].
]
Advertisement
Chapters
Table of Contents
