NTT docomo FOMA SO906i User Manual page 270

Saving a Broadcast Station into
the Channel List Manually
You can save broadcast stations to a channel
list by selecting a service area, prefecture, and
area.
1
From the Menu, select [1Seg/AV]
[Set channel list] and press
The Set channel list display appears.
When no channel list is saved
Follow step 3 to 5.
2
Select a place to save to and press
(Create).
The screen for creating a channel list appears.
3
Select [Select Serv Area] and press
4
Select a service area
area and press
The screen for confirming the channel information
of the selected service area appears.
5
Press (OK), select [Yes], and press
The channel list is saved.
Depending on the area you use, you may not be
able to save a broadcast station correctly even
if you set the Select Serv Area. In this case, use
the Auto channel set.
268
[1Seg]
.
.
a prefecture
.
Selecting a Channel List to be
Used
You can select a channel list suitable for your
current location. Also, you can edit the saved
channel lists.
1
From the Menu, select [1Seg/AV]
[Set channel list] and press
The Set channel list display appears.
To activate 1Seg from the channel list
Move the cursor to a channel list, press
(Ch. list), move the cursor to a broadcast station
in the channel list, and press
To change the name of a channel list
Move the cursor to a channel list and from the
Function menu, select [Edit title]. Enter a name
within 10 full-width or 20 half-width characters.
To delete a channel list
Move the cursor to a channel list and from the
Function menu, select [Delete one]
 The currently used channel list cannot be
deleted.
To reset the channel list
From the Function menu, select [Reset], enter
the Security code, and select [Yes].
To display detailed information of a broadcast station
Move the cursor to a channel list, press
an
(Ch. list), move the cursor to a broadcast station
in the channel list, and press
2
Select a channel list and press
The channel list to be used is set.
.
Editing Remote-control Numbers
A remote-control number which can be used
for selecting a station is already assigned
to each broadcast station. Remote-control
numbers can be changed.
1
Select a channel list in the Set channel
list display and press
The Function menu appears.
[1Seg]
.
(Watch).
[Yes].
(Detail).
.
(Func).