Originating A Pushtalk Call Using The Pushtalk Phonebook - NTT docomo FOMA SO906i User Manual

Saving a Member to a Group
1
Press in the stand-by display and
press (Group).
The Group list display appears.
2
Select a group and press
The Member list display of the selected group
appears.
3
Press (Edit).
4
Select a member and press
" " appears on the selected member.
To cancel all selections
Press (Rel all).
5
Press (Complete).
The selected member is saved in the group.
Originating a PushTalk Call
Using the PushTalk Phonebook
If you save persons as members in the
PushTalk phonebook, you can originate a
.
PushTalk call to several persons.
 When 2in1 is set to the B mode, you cannot use the
PushTalk phonebook.
 When 2in1 is set to the Dual mode, you cannot use
members for which the Phonebook 2in1 setting is
set to [B].
.
1
Press
a member, and press
" " appears for the selected member.
To display phone numbers
2
Press
3
Press
in the stand-by display, select
Press to switch the display temporarily
between names and phone numbers.
.
When a PushTalk call is
originated, the signal tone
sounds.
To speak
Press
is open. You can speak
while you press and hold
to end the communication.
.
while the floor
.
85
Continued