Table of Contents
Advertisement
5
Select a display method at [Call display].
[Name+Phone number]:
Display the name and phone number of a person
who is saved as Secret.
[Name]:
Display the name only of a person who is saved
as Secret.
[Phone number]:
Display the phone number only of a person who
is saved as Secret.
When receiving/originating a PushTalk call, even
if you set to [Name+Phone number], the name is
only displayed.
6
Select a display method at [Mail display].
[Name+Subject]:
Display the name of a sender who is saved as
Secret and subject. For SMS, "SMS" appears
instead of the subject.
[Address+Subject]:
Display the mail address of a sender who is
saved as Secret and subject. For SMS, the
phone number is displayed and "SMS" appears
instead of the subject.
[Name]:
Display the name only of a sender who is saved
as Secret.
[Address]:
Display the address of a sender who is saved as
Secret. For SMS, the phone number is displayed.
[Only notice]:
"Unread mail/message" appears.
7
Select [ON]/[OFF] at [Phonebook image].
The Secret setting is set.
When the Secret data display is set to [Display], " "
appears.
When the caller/recipient is saved as Secret in
the Phonebook, the name and phone type of
a person are not displayed in the Redial/Dial
frequency/Received record. Once you cancel the
Secret, they are displayed.
Even if the Secret data display is set to [OFF], the
data is saved in the Redial or Received record.
When there is a missed call from a person who
is saved in the Phonebook which is saved as
Secret, the notification icon does not appear.
When there is a record message from a person
who is saved in the Phonebook which is saved as
Secret, the name of the person is not displayed.
Display the Secret Data
You can set [Display]/[OFF] of the Secret data
display (P.130) in the lists of the Phonebook or
Redial/Dial frequency/Received record, or the
stand-by display.
Example: Setting [Display] in the Redial record list
1
Press
(
) in the stand-by display and
press
(Func).
The Function menu appears.
You can also set [Display] of the Secret data
display by pressing
stand-by display, entering the Security code, and
pressing
(OK). While [Display] is set, press
for over a second to set the Secret data
display to [OFF].
2
Select [Secret data disp] and press
The Security code screen appears.
3
Enter the Security code and press
(OK).
4
Select [Display] and press
The Secret data disp is set to [Display] and " "
appears.
To hide the secret data
Select [Undisplay]. The secret data is not
displayed and " " disappears.
<Secret data display>
for over a second in the
.
.
131
Advertisement
Chapters
Table of Contents
