NTT docomo FOMA SO906i User Manual page 312

[Font color]:
Select the color of a font to be pasted.
[Font size]:
Select the size of a font to be pasted.
[Font type]:
Select the type of a font to be pasted.
[Thickness]:
Select the thickness of a font to be pasted.
[Underline]:
Select whether to display a line under a font to
be pasted.
3
Set each item.
4
Press (OK).
5
Use /
and press
To add the same text stamp
Repeat step 5.
To paste another text stamp
Press (Retry) and perform step 2 to 5 again.
6
Press (OK).
7
Press (Save), select [Overwrite], and
press .
The image with the text is saved by overwriting the
original image.
To save as a new image
Select [Save new]
Trimming Part of an Image After
Zoom In
You can specify a part of an image after
zooming in on it and trim it into a size of
[ s Q C I F ( 1 2 8
[ Q V G A ( 2 4 0
[VGA(640 480)], and [Stand-by(480 864)].
 When the image size is [sQCIF(128
cannot trim this image.
Example: Trimming an image and saving by overwriting
1
From My picture file list, select an image,
press , and press
The Function menu appears.
310
to adjust the position
(Paste).
a place to save to.
9 6 ) ] , [ Q C I F ( 1 7 6
3 2 0 ) ] , [ C I F ( 3 5 2
96)], you
(Func).
2
Select [Edit photo]
size of an image to be trimmed and press
.
 The image size displayed in gray is not available
for trimming.
3
Press
 Press
to reduce an image.
The zoom is adjusted and the bar is displayed for
the zoom magnification you have set.
4
Use
trimmed and press
The image is trimmed to the selected size.
5
Press
press
The trimmed image is saved by overwriting the
original image.
To save as a new image
Select [Save new]
Rotating an Image
An image of [sQCIF(128 96)], [QCIF(176
144)], [QVGA(240 320)], [CIF(352 288)],
[VGA(640 480)], and [Stby(480 864)] can
be rotated.
1 4 4 ) ] ,
2 8 8 ) ] ,
Example: Rotating an image and saving by overwriting
1
From My picture file list, select an image,
press
The Function menu appears.
2
Select [Edit photo]
.
3
Press
Every time you press
clockwise by 90 degrees.
4
Press
press
The rotated image is saved by overwriting the
original image.
To save as a new image
Select [Save new]
[Zoom&trim]
(Zoom(T))/ (Zoom(W)).
(Zoom(T)) to enlarge and
/ to select the area to be
(OK).
(Save), select [Overwrite], and
.
a place to save to.
, and press (Func).
[Rotate] and press
(Rotate) and press
(Rotate), the image rotates
(Save), select [Overwrite], and
.
a place to save to.
a
(Zoom(W))
(OK).