NTT docomo FOMA SO906i User Manual page 131

You can receive mail/Message R/F automatically
even if the Personal data lock of the Mail/
Message is set.
You need to cancel the Personal data lock
temporarily to download i-
Personal data lock of the i- ppli is set.
When the Personal data lock of the Schedule
is set, even if the Calendar set at the Calendar/
Clock is displayed in the stand-by display, the
saved schedules cannot be displayed including
while canceling the lock temporarily.
When the Personal data lock of the Alarm,
Schedule, or Multimedia is set, When the
starting time of the Alarm, Schedule alarm, or
Booking alarm comes, " " is displayed as alarm
information except the starting time.
When you set the Personal data lock, all
incoming call is accepted regardless of the
Accept/Reject call setting.
You need to cancel the Personal data lock
temporarily to receive the infrared communication
when the Personal data lock is set.
Yo u c a n n o t r e c e i v e d a t a u s i n g t h e i C
communication when the Personal data lock is
set.
When the Personal data lock is set, you can still
obtain a ToruCa card from a reading device but
the communication display or notification icon is
not displayed.
You can still use Osaifu-Keitai by holding up and
showing the FeliCa mark to a reading device
even if the Personal data lock is set.
When you set the Personal data lock, the FOMA
terminal does not display the following icons. If
you cancel the lock, they appear.
- " " (New ToruCa)
- " " (PB update failed)
- " " (Stand-by SW error)
- " " (Update completed)
- " " (Update definitions)
Canceling the Personal Data
Lock Temporarily
Some functions can be used by entering the
Security code to cancel the lock temporarily
even if the Personal data lock is set.
Example: Displaying the Phonebook when the Personal
data lock of the Phonebook is set
1
Press ( ) in the stand-by display.
The screen for confirming whether to cancel the
Personal data lock temporarily appears.
2
Enter the Security code and press
(OK).
The Personal data lock of the Phonebook is
canceled temporarily and the Phonebook is
ppli when the
displayed. While canceling the lock temporarily,
" " (Gray) appears.
While canceling the lock temporarily, the locks
of other functions whose locks can be canceled
temporarily are canceled temporarily as well.
Once you end the Phonebook, the Personal data
lock is set again.
 When other function is activated, the Personal
Restricting Dialing from
the Keypad
The keypad is locked to restrict placing a voice
or videophone call or originating a PushTalk
call. To cancel the Key dial lock temporarily,
enter the Security code.
 When you set the Key dial lock, you cannot perform
the following functions.
1
From the Menu, select [Settings]
Security]
The Security code screen appears.
2
Enter the Security code and press
(OK).
data lock is not set again until all functions are
ended.
Place a call using the keys on the keypad
(excluding calls made by the 2-touch dial or
using the Flat-plug Earphone/Microphone with
Switch) or [Call back] from i-mode mail
Add a member during PushTalk communication
using the keys on the keypad
Place a call to a recipient who is not saved in
the Phonebook using the Redial/Dial frequency/
Received record
Send i-mode mail or SMS to a recipient who is not
saved in the Phonebook
Phone To (AV Phone To) or Mail To
Save new data or edit/delete data in the
Phonebook
Operate the Phonebook stored in the microSD
card
Select the Phonebook attached to i-mode mail
Save/edit/delete the Location notice or information
of a party
Send the Phonebook data using the infrared
communication
[Key dial lock] and press
<Key dial lock>
[Lock/
.
129
Continued