NTT docomo FOMA SO906i User Manual page 281

When the timer recording starting time comes while
watching 1Seg
The Prep. to Rec display appears. To cancel
recording, press and select [Yes].
To cancel the recording during timer recording
Press while recording and select [Yes].
Even if the Dur multitask Rec is set to [Prefer
recording], the timer for recording a program
may be canceled in a case such as when there
are too many active functions or there is not
enough memory. Also, while transferring data to
the microSD card, the recording does not start.
If the Dur multitask Rec is set to [Prefer
operat.] and when functions that cannot be
run simultaneously are active, the screen for
confirming whether to start the timer recording
appears. When you select [Yes], the timer
recording starts.
However, regardless of selecting [Yes] on the
confirmation screen, the timer for recording a
program may not start in a case such as when
there are too many active functions or there is not
enough memory.
Even if the FOMA terminal is outside of the
broadcast service area when the timer recording
starting time comes, the timer recording works
effectively.
However, the timer recording fails if the FOMA
terminal is outside of the broadcast service area
all the time from the beginning to the end of the
scheduled recording time. The message "Could
not receive broadcast wave" appears in the
Result detail display (P.281).
Timer recording does not start in the following
cases.
- When the FOMA terminal is powered off
- When the UIM is not inserted
- While the Lock all is set
- While the Omakase Lock is set
- During packet communication
- During 64K data communication
- During the infrared communication
- During the iC communication
- While updating the software
- While using the Data Security Service
Setting the Operation for the
Booking Alarm
You can set the detailed operation for the
Booking alarm.
1
Press (Func) in the Res. data list
display.
The Function menu appears.
2
Select [Booking ALM set] and press
3
S e l e c t a n a l a r m t o n e f ro m M U S I C /
i-motion/Melody of the Data Box at [Alarm
tone].
 You can set the following files. You can select a
®
Chaku-Uta from [i-motion].
File
Category
format
MUSIC AAC-LC/ Max. 5M
HE-AAC bytes
i-motion MP4 Max. 10M
bytes
Melody SMF/ Max. 350K
MFi bytes
Some files may not be set.
When you select a Chaku-Uta Full
choice of specified playback ranges from [MUSIC]
The screen for selecting a type of setting
appears. If you select [Full song], the whole track
®
of Chaku-Uta Full is set for the alarm tone. If you
select [Point], the specified playback range of
®
Chaku-Uta Full is set for the alarm tone.
To mute the alarm tone
Select [Silent].
To check the alarm tone
Move the cursor to the alarm tone and press
(Play).
.
File size Image size
Max. [VGA(640
480)]
®
that has a
Continued
279