Table of Contents
Advertisement
Conditions of Packet and 64K Data
Communication
The following conditions are necessary to
perform communication using the FOMA
terminal (for using in Japan).
- The FOMA USB Cable with Charge Function 01/02
(optional) can be used on your PC.
- Your PDA must have FOMA packet and 64K data
communication support.
- You must be inside of the FOMA's service area.
- The host for packet communication must have
FOMA packet communication support.
- The host for 64K data communication must
have FOMA 64K or ISDN synchronous 64K data
communication support.
Note, however, that even if you comply with
the above conditions, you may not be able to
perform communication if the base station is
congested or radio wave condition is poor.
Before Using Data
Communication
Operating Environment
Operating environment of a PC to be used for
data communication is as follows.
Item
PC main unit PC/AT compatible machine with a
built-in or removable CD-ROM drive
USB port (Universal Serial Bus
Specification 1.1/2.0 compliant)
OS 1
Windows 2000, Windows XP,
Windows Vista (Japanese version)
Required
Windows 2000: 64MB or more
memory 2
Windows XP: 128MB or more
Windows Vista: 512MB or more
Hard drive
5MB or more free space
capacity 2
Display
High color (65,536 colors) and high
resolution (800
(recommended)
1 Operation on a PC running upgraded OS is not
guaranteed.
2 The required memory and hard drive capacity may
vary depending on the PC system configuration.
424
Required environment
600 dots) or over
Other Necessary Items
Other than the FOMA terminal and a PC, the
following hardware and software are necessary.
FOMA USB Cable with Charge Function 01/02
(optional) or FOMA USB Cable (optional)
Supplied CD-ROM "FOMA SO906i CD-ROM"
Use the exclusive "FOMA USB Cable with
Charge Function 01/02" or "FOMA USB Cable".
A generic USB cable for a PC connection cannot
be used because it has a different connector
shape.
If you use USB HUB, it may not work properly.
Advertisement
Chapters
Table of Contents
