Table of Contents
Advertisement
4
Select [ON]/[OFF] at [Phonebook image].
[ON]:
Display the image set for the Des call display in
the Phonebook when placing/receiving a voice/
videophone call.
[OFF]:
Display the image set in the Animation or
Incoming set when placing/receiving a voice/
videophone call.
5
Select a color of the font to be displayed
at [Disp. call/rcv. No.].
[dark]:
Set the darker color for the display or call record
display when placing/receiving a voice or
videophone call, or the font for the received/sent
mail lists.
[light]:
Set the lighter color for the display or call record
display when placing/receiving a voice or
videophone call, or the font for the received/sent
mail lists.
[Normal]:
Set the normal color for the display or call
record display when receiving/placing a voice or
videophone call, or the font for the received/sent
mail lists.
When 2in1 is set to ON, the information of
Number A/Address A is displayed in the font
color which is set at the Disp. call/rcv. No. To
display the information of Number B/Address B
in the different color, you can set at the Set call/
receive No. of the 2in1 setting (P.418).
114
Setting the Illumination of the
Display, Keypad, etc.
You can set the display light brightness, color
of the keypad light, and whether to turn on the
light of the display or keypad.
1
From the Menu, select [Settings]
[Display]
[Backlight/Illumi.] and press
.
[Auto setting]:
Set whether to adjust the display light brightness
and set ON/OFF of the keypad light automatically
by the Brightness Sensor to adapt for the
surrounding brightness.
When it is set to [ON], do not cover the
Brightness Sensor with your hand or other
objects.
[Adjust light]:
Set the display light brightness.
[Keypad light]:
Set the color of the keypad light. You can also set
to [OFF].
[Backlight always on]:
Set whether to keep the display light on all
the time including at the time of charging or
recording.
[Illumination]:
Set whether to light the illumination indicator in
some cases such as when placing/receiving a
voice/videophone call, sending/receiving mail,
sounding the alarm. Also set the pattern of the
illumination indicator.
2
S e l e c t [ O N ] / [ O F F ] o f a d j u s t i n g
automatically at [Auto setting].
3
Set the display light brightness at [Adjust
light].
Select from [1 to 5].
To reset to the default brightness
Press
(Reset).
<Backlight/Illumi.>
Advertisement
Chapters
Table of Contents
