Table of Contents
Advertisement
When Using Windows Vista
1
Click [
]
The user account control window appears.
2
Click [
].
3
Click each device and confirm the name of the
installed driver.
Device type
Port (COM/LPT)
Modem
Universal Serial Bus
controller
The COM port number may be different depending on
the PC.
Uninstalling the FOMA
Communication Configuration Files
A user with Administrator privilege can uninstall the software.
Before starting uninstallation, make sure to disconnect the
FOMA terminal from the PC.
When Using Windows XP/Windows 2000
Example: When using Windows XP
1
Click [
]
When using Windows 2000
Click [
]
then double-click [
2
Select [FOMA SO906i USB] and click [
The deletion confirmation window appears.
3
Click [
].
T h e u n i n s t a l l a t i o n o f t h e F O M A c o m m u n i c a t i o n
configuration files starts.
4
Click [OK].
When you failed to install the software or "FOMA SO906i
USB" does not appear on the window in step 2, perform
the following operations.
1. Set "FOMA SO906i CD-ROM" in the CD-ROM drive of
the PC.
2. Click [
]
[
3. Right-click the CD-ROM icon and click [
4. Open the folders in the CD-ROM in the order of
"SO906i_USB_Driver"
5. Double-click [so906iun.exe].
[
]
]
[
Driver name
FOMA SO906i Command Port
FOMA SO906i OBEX Port
FOMA SO906i
FOMA SO906i
[
]
].
[
]
[
].
].
"Drivers"
"Win2k_XP".
When Using Windows Vista
1
[
Click [
].
2
Select [FOMA SO906i USB] and click [
The user account control window appears.
3
Click [
The deletion confirmation window appears.
4
Click [
T h e u n i n s t a l l a t i o n o f t h e F O M A c o m m u n i c a t i o n
configuration files starts.
5
Click [OK].
When you failed to install the software or "FOMA SO906i
USB" does not appear on the window in step 2, perform
the following operations.
1. Set "FOMA SO906i CD-ROM" in the CD-ROM drive of
the PC.
2. Click [
3. Right-click the CD-ROM icon and click [
4. Open the folders in the CD-ROM in the order of
"SO906i_USB_Driver"
5. Double-click [so906iun.exe].
About the FOMA PC Setup
Software
[
To connect the FOMA terminal to a PC and perform
p a c k e t o r 6 4 K d a t a c o m m u n i c a t i o n , v a r i o u s
] and
communication-related settings are necessary. If you
].
use the FOMA PC setup software, you can perform the
].
following settings very easily. You can also set up for
packet or 64K data communication without using the
FOMA PC setup software (P.18).
(Easy setup)
You can follow the guidance to create a dial-up connection
for FOMA data communication. The optimization of the
communication settings is performed at the same time.
Before using FOMA packet communication, optimize the
communication settings on the PC.
The optimization of the communication settings is necessary
for the possible communication performance.
(APN)
Perform the setting of a host (APN) required for packet
communication.
Unlike in 64K data communication, a regular phone number
is not used for a FOMA packet communication host. You must
register in advance a host name called APN in the FOMA
terminal for each host and specify this registration number
(cid) in the host number field to connect.
At the time of purchase, cid1 and cid3 are assigned to
"mopera.ne.jp", a host (APN) for mopera and "mopera.
ne.jp", a host (AP) for mopera U respectively. To connect to
other provider or the corporate LAN, the host (APN) setting
is necessary.
If you have a FOMA PC setup software Ver.4.0.0 or earlier
(hereinafter referred to as an old FOMA PC setup software)
installed, uninstall it beforehand.
6
]
[
].
].
].
].
]
[
].
"Drivers"
"WinVista32".
(Optimizing the communication settings)
(Host (APN) setting)
]
[
].
Advertisement
Chapters
Table of Contents
