Powering On/Off; Setting The Basic Functions; Power On/Off; Initial Setting - NTT docomo FOMA SO906i User Manual

Powering On/Off

 When you power on the FOMA terminal, the screen informing to execute the software update
automatically may appear (P.473).
1
Press
If you replace the UIM with another one (except when the Omakase Lock is set), you need to
enter a 4- to 8-digit Security code when the FOMA terminal is powered on. When the entered
code is correct, the stand-by display appears. If you enter a wrong Security code five times
consecutively, the FOMA terminal is powered off. (You can still power on the FOMA terminal,
however.)

Setting the Basic Functions

The Initial setting can be used to make basic settings such as the Date/time and
Security code. See the respective pages for details about the settings.
Available setting items
Item
Date/time
Change code
Keypad sound
Location request
All font size setting Set the size of fonts to be used for displaying the Phonebook, Call record,
1
From the Menu, select [Settings]
48
(PWR) for over two seconds.
The FOMA terminal is powered on, the display and the keypad lights
are turned on, and an animation is displayed. After a while, the stand-by
display appears.
 If you have set the PIN1 code setting to [ON], the PIN1 code input
screen appears. Enter the PIN1 code and press
To power off
Press (PWR) for over two seconds.
To check the Welcome mail
"Welcome
at the time of purchase. Press
select " "
 At the time of purchase, the incoming indicator flashs to notify new
mail when you fold the FOMA terminal until the Welcome mail is
displayed or "
Set the date and time of the FOMA terminal (P.49).
Change the Security code (P.123).
Set the volume of the tone to sound when you press the key (P.104).
Set whether to provide positioning information (P.255).
Mail, i-mode or Full Browser sites, and Input text display (P.119).
SO906i " and "SO906i
[Inbox] to display the Welcome mail.
" disappears.
Description
[Management]
<Power on/off>
(OK) (P.122).
(Link) in the stand-by display and
<Initial setting>
[Initial setting] and press
" are saved
.