NTT docomo FOMA SO906i User Manual page 209

3
Select the sorting method at [Sorting
criteria].
[Address]:
Specify a mail address. The mail address portion
after the @ mark is required. However, when
you set the mail address to "phone number@
docomo.ne.jp", enter the phone number only.
[Group]:
Specify a group.
[Subject]:
Enter a subject or a part of it within 100 full-width
or 200 half-width characters.
[None]:
Sort mail that does not meet any specified
sorting requirement.
4
Select a folder to be used for sorted mail
at [Folder to sort into].
When no folder is specified
Mail is sorted to [Inbox]/[Outbox].
5
Press (Complete).
The sorting requirement is saved.
If mail satisfies several sorting requirements,
the sorting requirement with a lower number in
the list has higher priority. If you set [None] for
sorting requirement, the sorting requirements
lower than the number you set become invalid,
and mail is sorted to the folder for which [None]
is set.
If you delete a folder for which the sorting
requirement was set, [Inbox]/[Outbox] is used as
a sort destination folder.
If data saved as Secret is contained in a group
that has been set as a sorting requirement, and
if you receive mail from a sender or send mail
to a recipient who is relevant to the data, it is
saved in [Inbox]/[Outbox]. To enable the sorting
requirement, set the Secret data display to
[Display].
An i- ppli with mail is automatically sorted to the
corresponding i- ppli with mail folder regardless
of the sorting requirement.
Mail received before the sorting requirement is
set is not sorted automatically.
When 2in1 is set to ON, the sorting requirement
of the Group may become invalid.
You need to set the sorting requirement from the
Address, Subject, or None.
Adding a Signature to Mail
When saved beforehand, your signature can
be attached at the end of the main body of
mail.
Saving a Signature
The signature attached to mail can be created
and saved.
1
From the Mail menu, select [Mail setting]
[Edit signature] and press
The Edit signature display appears.
 If you have saved a signature before, it is
displayed.
2
Press (Edit) and enter a signature.
Enter a signature within 5,000 full-width or 10,000
half-width characters.
You can enter Pict-D to compose Deco-mail.
3
Press (Complete).
The signature is saved.
You can also decorate a signature (P.185).
Adding a Signature Automatically
The saved signature can be automatically
attached to the main body when you compose
mail.
1
From the Mail menu, select [Mail setting]
[Signature] and press
2
Select [Auto]/[No] and press
The Signature is set.
Even if the Signature is set to [No], you can
attach the signature manually. From the Function
menu in the Input text display, select [Add
signature].
Even if the Signature is set to [Auto], you cannot
attach a signature to a reply mail using the Quote
function or a forwarded mail.
.
.
.
207
Continued