Preparations And Flow Of Data Communication - NTT docomo FOMA SO906i User Manual

Preparations and Flow of Data
Transfer (OBEX™ Communication)
To use the FOMA USB Cable with Charge Function
01/02 (optional), install the FOMA communication
configuration files.
Install the FOMA communication configuration files (USB drivers) (P.4).
 Install from the supplied CD-ROM
or
 Download from the DoCoMo's website and install
Data transfer
Preparations and Flow of Data
Communication
The preparations required for performing packet and
64K data communication by connecting the FOMA
terminal to a PC are given below.
Install the FOMA communication configuration files (USB drivers) (P.4).
 Install from the supplied CD-ROM
or
 Download from the DoCoMo's website and install
Connect the FOMA terminal to a PC (P.4).
Check the installed FOMA communication configuration files (P.5).
When you use the
FOMA PC setup
software
Install the FOMA PC setup software (P.7, 13).
Set a host.
Packet communication
 "mopera U" or
"mopera" (P.9, 15)
 Other provider
(P.9, 15)
Perform communication (P.11, 17).
Start up communication software that is
compatible with AT commands (P.18).
Set ON/OFF for the Notify caller ID (P.19).
Perform the dial-up connection (P.23).
3
When you do not use
the FOMA PC setup
software
64K data communication
 "mopera U" or
"mopera" (P.10,16)
 Other provider
(P.11, 17)
Set a host (P.18).
Set up the dial-up network (P.19).