Originating A Pushtalk Call - NTT docomo FOMA SO906i User Manual

Operations during PushTalk
Communication
Operation
Speak When the floor is open, you can speak
only while you press and hold
While another member has the floor,
you cannot get it even if you press
.
Add a member Press
enabled only when you originate a
PushTalk call.
S w i t c h O N / P r e s s
O F F o f t h e press the key, the ON/OFF setting is
h a n d s - f r e e switched.
operation
A d j u s t t h e Use
volume of the
caller's voice
Te r m i n a t e a Press
PushTalk call
R e c e i v e a Press
voice call I f y o u re c e i v e a v o i c e c a l l , t h e
P u s h Ta l k c o m m u n i c a t i o n i s
terminated.
The operation for an incoming voice
call while using PushTalk can be
customized (P.87).
Each speech session granted by obtaining the
floor is time limited. The obtained floor is released
after the time limit. The PushTalk communication
is terminated if no member takes over the floor
within a certain interval.
W h e n t h e r e i s a n y c h a n g e i n P u s h Ta l k
communication status or a member takes over
the floor, the signal tone sounds.
Yo u c a n n o t u s e i - m o d e d u r i n g P u s h Ta l k
communication.
When other functions are activated, you cannot
obtain the floor. However, when you activate a
function while you have the floor, you can speak
while you press and hold
When you receive a videophone call, data
communication, or a PushTalk call during
PushTalk communication, a new call is saved in
the Received record and the current PushTalk
call is continued.
Key operation
.
(Add). This operation is
( ) . E v e r y t i m e y o u
or press .
.
(P.67).
.
Originating a PushTalk
Call
 You cannot originate a PushTalk call during a voice
call, a videophone call, or data communication, or
while the B mode is set in 2in1.
 If you originate a PushTalk call during i-mode
communication, the i-mode communication is
terminated. Originating a PushTalk call while running
i- ppli also stops the i- ppli.
 Number B of 2in1 cannot be used for PushTalk and
PushTalkPlus services.
1
Enter a phone number in the stand-by
display.
2
Press .
3
Press to end the communication.
W h e n y o u o r i g i n a t e a
PushTalk call, it is switched
to the hands-free operation
that allows you to hear the
signal tone from the speaker.
To speak
Press while the floor
is open. You can speak
while you press and hold
.
Continued
81