Table of Contents
Advertisement
You can only insert an image or enter a text in the
portion specified by a template beforehand.
The number of the entered bytes displayed in the
Edit Decome-Anime display is only just an estimated
byte. The amount of data may be different in cases
such as when the mail is completed or the edit
display is displayed again.
Example: Entering a text in [Char. 1] and inserting an
image in [Image 1]
1
From the Mail menu, select [Create
D-Anime] and press
The Edit Decome-Anime display appears.
2
Enter an address and subject.
Follow the same steps as in "Compose and Send
i-mode mail" (P.183, step 2 to 4).
3
Select [
] and press
To check a template
Move the cursor to a template and press
(Preview).
4
Select a template and press
To check the created Decome-Anime
Press
(Preview).
To end editing
From the Function menu, select [Quit edit].
To reselect a template
F ro m t h e F u n c t i o n m e n u , s e l e c t [ S e l e c t
template].
To reset all entries
From the Function menu, select [Reset editing].
.
.
.
5
Enter a main body in the [Char. 1].
You can enter a main body within 5,000 full-
width or 10,000 half-width characters, however,
the actual number of characters you can enter is
depended on a template.
A new line is inserted automatically depending
on the width of a text display area of a template.
When you enter a new line while entering
characters, the number of characters you can
enter is reduced.
You cannot change the font size of the characters
being entered.
6
Select a color at [Font color].
7
Select [Image 1]
press
.
To delete an image
Select [Image 1]
8
Select an image from My picture of the
Data Box/microSD.
The image of the size less than [CIF(352 288)]
can be inserted.
The number of the entered bytes displayed in
the Edit Decome-Anime display is only just an
estimated byte. You may not be able to insert
an image even if its file size is less than the
displayed bytes.
The image may be inserted in the different
orientation displayed in My picture, etc.
To record a still image by activating the camera
Select [Camera] and record an image.
9
Select
(Complete) and press
The Decome-Anime is sent.
Depending on the contents of Decome-Anime
such as when inserting a GIF animation or
Flash movie, when you press
the screen for informing that the maximum size
exceeds appears and the Decome-Anime cannot
be sent.
Pict-D cannot be entered.
When the data exceeds 90K bytes by inserting
an image or entering text, the screen for
informing that the maximum size exceeds
appears and you cannot insert an image or enter
text.
Every time the text input display is displayed, a
new line is automatically entered and the number
of the entered bytes may be changed.
You cannot add a signature on Decome-Anime.
[Select image] and
[Remove image].
(Send).
(Complete),
Continued
189
Advertisement
Chapters
Table of Contents
