NTT docomo FOMA SO906i User Manual page 335

2
Select [microSD mode] and press
The microSD mode is set and " " changes to " ".
On the PC, "
for the microSD card.
 You can check the current USB mode and
connection status by the following icons.
Icon Mode/Connection status
Communication mode
microSD mode
MTP mode (Connected)
MTP mode (Transferring)
MTP mode (Completed)
MTP mode (Error)
It appears when the FOMA ter minal is
connected to a PC by the MTP mode and
cannot start the connection because there
is not enough memory. End the unused
applications, increase memory space, and
then retry the operation again.
3
Connect the FOMA terminal and PC
using the FOMA USB Cable with Charge
Function 01/02 (optional).
Insert the connec-
tor horizontally
with the label side
facing up.
3
USB
USB terminal
connector
FOMA USB Cable with Charge
Function 01/02 (optional)
.
" is displayed
1
2
External
connection terminal
External connection
connector
T h e i c o n " " ( m i c ro S D
m o d e ) a p p e a r s i n t h e
stand-by display.
When you press (Link)
and then select " ", the
USB mode setting display
appears.
Do not format the microSD card using a PC, etc.
Make sure to format it on the FOMA terminal.
Even if you set the USB mode setting to
[MTP mode] or [microSD mode] and connect
the FOMA terminal to a PC, the PC may not
recognize the FOMA terminal while the FOMA
terminal is accessing to the microSD card
(reading/saving data, etc.) or the microSD card
is not inserted.
While the USB mode setting is set to [MTP mode]
and the FOMA terminal is connected to a PC,
when you press (MENU), the Standard menu
appears. The Kisekae menu is not displayed.
Also, some functions may be limited.
Terminating the microSD Mode
To remove the FOMA terminal from a PC,
perform the procedure to safely remove the
hardware on the PC in advance, which is
slightly different for each OS.
Example: When using Windows XP
1
Double-click the task tray icon [
Windows desktop.
]
o n t h e
333
Continued