Table of Contents
Advertisement
Use the positioning accuracy as a guide. The
accuracy may vary depending on the radio wave
condition of the vicinity.
2
Select [Read a Map] and press
The map of deter mined current location is
displayed.
After displaying the map, you can search for the
neighborhood information using "
" (i-mode area –Neighbor info–). For
details about "
DoCoMo's website.
To use the location information with GPS-compatible
i- ppli software
Select [Run i-appli]
To paste the location information to mail
Select [Paste to mail]
"
location URL" that has a link to the location
information is entered in the mail main body.
The location information URL being sent is
only displayed on the i-mode compatible
terminals.
To save the location information in the Phonebook
Select [Add to phonebook]
Follow the same steps as in the Add to FOMA
terminal phonebook (P.91, step 3 to 6).
To add location information on an image
Select [Attach to image]
picture of the Data Box.
You can add location information using the GPS
function on an image recorded by the camera
automatically (P.151).
Using the GPS-compatible
i- ppli
You can use the location information with GPS-
compatible i- ppli software.
When you use a GPS-compatible i-
location information is sent to the information
provider of the software being used.
When you use the GPS function with a GPS-
compatible i- ppli, set the Location usage of the
software being used to [Yes].
The method of using the location information varies
depending on the software.
1
From the Menu, select [LifeKit]
[i-appli] and press
The GPS software list display appears.
2
Select a software and press
The software is started up and "
.
", see the
software to be used.
[Yes].
[New]/[Add].
an image from My
<i-appli>
ppli, the
[GPS]
.
.
" or "
" appears.
Using
The preinstalled "
uses the GPS function and a map to display
your current location or specified location, to
search the information on neighborhood, and
to navigate you to the destination by public
transportation, walk, or car.
The voice input feature allows you to use the
transfer information easily.
An additional packet communication charge is
required for using this function. It is recommended
to use the Pake-Houdai/Pake-Houdai Full for this
software.
When you have deleted the software but you want to
restore it, download it from "
(i-mode area-Neighbor info-).
You cannot use this software when 2in1 is set to the
B mode.
Please note that DoCoMo will not guarantee any
result such as of the accuracy and immediacy of
information such as map or route.
While driving a car, please let a person other than
the driver operate it.
Basic Service and Additional Service
There are the basic services and additional
services for this software.
Basic service
: S e r v i c e s p ro v i d e d b y
D o C o M o f o r f r e e o f
charge.
Additional service : S e r v i c e s p ro v i d e d b y
ZENRIN DataCom that
r e q u i r e a n a d d i t i o n a l
charge.
You can use the additional services except
the traffic information up to 90 days after you
activate the software for the first time.
After 90 days, if you wish to keep using the
additional services, you need to apply for a
membership (paid) to "
" (ZENRIN Maps+Navi) provided by ZENRIN
DataCom.
If you apply for a membership while still using
it, you do not need to download the software
again. You can keep using the software.
(Map appli)
(Map appli)"
"
Continued
249
Advertisement
Chapters
Table of Contents
