Using The Basic Functions Of The Camera - NTT docomo FOMA SO906i User Manual

Noise in the form of a mosaic may appear in an
image or the image or sound may be interrupted
while you are recording a movie. Note that this is
not malfunction.
The movie sound is recorded via the microphone
of the FOMA terminal. If you operate the keys
or block the microphone during recording, the
recording may be affected by the sound of the
keys and other noise.
The motion of the recorded movie may be rough
depending on the object you are shooting and
the recording conditions.
Using the Basic Functions
of the Camera
Graphical Menu
Main settings of the camera can be changed
from the Graphical menu.
In this manual, the icons displayed defaultly at
the time of purchase are used for describing
operations available from the Graphical menu,
regardless of them being changed because of
change in the settings.
 Because the icons of the Graphical menu vary
depending on the settings at the time, icons used in
this manual may differ from the actual ones.
 The Graphical menu cannot be displayed in the
Media style.
1
Press (Func) in the Camera mode
display.
 Submenu of the selected menu item
 Name of the selected item
 Menu item
 The icon for the currently set item appears.
 Guide of the selected item
2
Set each item.
Use to select a menu item to be set and
to select an item on the submenu, and press
148




Direct Key Operation
Frequently used functions are assigned a
Direct key. You can use Direct keys to change
settings with a simple key operation instead of
selecting from the Menu. Every time you press
the Direct key, the settings are changed.
For functions for which the Direct key operation
is available, the assigned Direct keys are also
mentioned in this manual.
 Functions are assigned to the Direct keys as follows.
Operation
Switch ON/OFF of the
Photo light
Select size
Switch camera
Select scene setting
White balance setting
Photometry setting
Switch ON/OFF of the
Grid Line
Picture effect setting
Position the current
location
Reset all setting
Switch the Shoot by
photo/Movie shoot
 You may not be able to operate some functions
depending on the Shoot mode.
Example: Setting the image size
1
Press in the Camera mode display.
Every time you press
changed. After about two seconds without any
operations, the display restores and the image size
is set to the last selected size.
2
Press until the image size you want.
The image size is set.
The Direct keys and functions assigned to them
.
can be checked on the Key operation guide
display that appears by pressing
Key operation Page
Press . P.153
Press . P.149
Press . P.149
Press . P.150
Press . P.154
Press . P.155
Press . P.153
Press . P.155
Press for over a P.152
second.
Press . P.155
Press . P.147
, the image size is
(Display).