Table of Contents
Advertisement
Selecting an Image Size
You can select the size of a still image and
movie to be recorded from eight and four
types, respectively.
When the Shoot mode of the still image is set to
[Panorama], [Continuous mode], or [Shoot with
frame], you cannot select the image size.
When the size of a movie is set to [QVGA(320
240)] or [VGA(640 480)], the image quality of the
movie is changed to [Super fine]. When the size of
a movie whose image quality is [Super fine] is set to
[sQCIF(128 96)], the image quality of the movie is
changed to [Standard].
When the size of a movie is set to [sQCIF(128 96)]
or [QCIF(176 144)], the Change screen is changed
to [to vertical]. Also, when the size of a movie is set
to [VGA(640 480)], the Change screen is changed
to [to horizontal].
1
Press
(Func) in the Camera mode
display, select [
image size, and press
The image size is set and the icon for the current
image size appears.
You can also set an image size by pressing
in the Camera mode display.
When the image size is set to [VGA(640
480)], [1M(1280 960)], [2M(1632 1224)], [2M
Wide(1920 1080)], or [3M(2048 1536)], the
saved with this side up indication "
The image is saved with the indicated side up.
Still image (Out-camera)
QCIF(176 144)
QVGA(240 320)
VGA(640 480)
Stby(480 864)
1M(1280 960)
2M(1632 1224)
2M Wide(1920 1080)
3M(2048 1536)
The image size which can be recorded with the
In-camera is [QCIF(176 144)], [QVGA(240
320)], or [VGA(640 480)].
Movie (Out-/In-camera)
sQCIF(128 96)
QCIF(176 144)
QVGA(320 240)
VGA(640 480)
] (Select size)
an
.
" appears.
Switching the Camera Used for
Recording
You can switch between the Out- and In-
cameras for recording.
When the Shoot mode of the still image is set to
[Panorama] or [Continuous mode], you cannot
switch the camera.
When the Shoot mode of the still image is set to
[Shoot with frame] while the image size is set to
[Stby(480 864)], you cannot switch the camera
from the Out-camera to In-camera.
When the camera is switched from the Out-camera
to In-camera, the following items are changed. The
Select scene and Auto Focus restore the previous
settings when switching the camera to the Out-
camera.
Item
Image size
Select scene
EV
Auto Focus
White balance
Photometry
Picture effect
1 The setting of the Image size or EV is changed
to the listed one when it cannot be set for the In-
camera.
2 The setting of the EV, White balance, Photometry,
or Picture effect is changed to the listed one when
the Select scene is set to other than [AUTO] for the
Out-camera.
3 The Picture effect is changed to [OFF] when it is
set to [Solarization].
1
Press
(Func) in the Camera mode
display, select [
[
] (Out camera)/[
press
.
The camera is switched.
You can also switch the camera by pressing
in the Camera mode display.
Setting
VGA(640 480) 1
AUTO
±0.0EV 1 2
OFF
AUTO 2
Center 2
OFF 2 3
] (Switch camera)
] (In camera), and
Continued
149
Advertisement
Chapters
Table of Contents
