Table of Contents
Advertisement
5
Select a full charge sound at [Full charge
sound].
Select from three types of start sounds, three types
of completion sounds, and [Silent].
The sounds of the FOMA terminal are set.
To check a full charge sound
Move the cursor to the sound effect and press
(Play).
The Start charge sound and Full charge sound
may not be heard under some conditions, such
as when another sound is active.
T h e 3 D s o u n d f u n c t i o n r e p r o d u c e s a
3-dimensional stereophonic sound or space-
wise moving sound, over the stereo speaker (or
the Flat-Plug Stereo Earphone Set (optional)).
This function lets you enjoy 3D sound i- ppli
games and ring tones with realistic sound. You
can feel the effect of this function when you hold
the FOMA terminal about 40 cm (this distance
depends on the sense of an individual) away and
facing toward you. Note that if the FOMA terminal
is moved left or right or the distance between the
terminal and you is not suitable, you cannot enjoy
the effect. The perception of this 3D effect varies
depending on the senses of an individual. If you
feel uncomfortable in any way, set the Stereo&3D
to [OFF].
Adjusting the Volume of
Caller's Voice
The volume of caller's voice during a voice,
videophone, or PushTalk call can be adjusted
in six levels from level 1 (smallest) to level 6
(largest).
1
From the Menu, select [Settings]
[Call setting]
The Volume display appears.
2
Use
to adjust the volume and press
(OK).
Select from [1 to 6].
The volume of caller's voice is set.
The volume can be adjusted by pressing
during a call. Whichever way you may take, the
most recently adjusted volume is used until it is
adjusted next time.
<Volume>
[Call]
[Volume] and press
Adjusting the Volume While
Playing Flash Movie
The sound volume while playing back a Flash
®
movie or Flash
Video (Full Browser only) on
the i-mode site or in mail, or on a website
of Full Browser can be adjusted in seven
levels: OFF (silent), level 1 (smallest) to level 6
(largest).
Example: Adjusting the volume of i-mode and mail
1
From the i-mode menu, select [i-mode
setting]
[Sound effect] and press
To adjust the volume of Full Browser
From the Full Browser menu, select [Full Browser
setting]
[Sound effect].
2
Set the sound effect volume.
Select from [OFF] and [1 to 6].
The sound volume while playing Flash movie is set.
You can also adjust the volume by selecting
[Sound effect] from the Function menu while
playing Flash movie (P.165).
The sound effect may not be heard depending
on Flash movie.
Adjusting the Volume While Running
i- ppli Software
The sound volume while running i-
software can be adjusted in seven levels: OFF
(silent), level 1 (lowest) to level 6 (highest).
1
From the Menu, select [i appli]
setting]
[Volume setting] and press
.
The Volume setting display appears.
2
Set the software volume.
Select from [OFF] and [1 to 6].
The sound volume while running i- ppli software is
set.
<Sound effect>
.
<Volume setting>
ppli
[i
ppli
.
105
Advertisement
Chapters
Table of Contents
