Table of Contents
Advertisement
Putting the 1Seg Antenna back
1
Change the direction of the antenna back.
2
Push the 1Seg Antenna back while
aligning the top of the 1Seg Antenna with
the counter part until it stops.
If you use force to put the antenna back without
confirming the correct orientation, it may cause
malfunction.
1
The display that appears when 1Seg is used
for the first time
When 1Seg is activated for the first time, the
display for confirming the notabilia of the
service appears. When the FOMA terminal is
in the Media style, switch to the Normal style,
and then check the contents and press
(P.264).
Battery level
If you try to activate 1Seg with the battery level low,
the screen for confirming whether to activate 1Seg
appears. If you select [Yes], 1Seg is activated.
When the battery level becomes low while watching
1Seg, the screen for confirming whether to quit
1Seg appears. When you select [Yes], 1Seg is
terminated.
When the battery level becomes low, the screen
informing that the battery level becomes low
appears. "
"/"
1Seg or "
"/"
1Seg program while the screen appears.
When the battery level becomes extremely low
while watching or recording a 1Seg program, 1Seg
is terminated. When you are recording a 1Seg
program, the video recorded up to this point is
saved automatically.
266
2
"/"
" flashes when watching
"/"
" flashes when recording a
When there is an incoming call, etc. while
watching 1Seg
When receiving a voice, videophone, or PushTalk
call while watching 1Seg, you can answer the
call by pausing video and sound. After the call is
terminated, the screen for confirming whether to
use Time shift play appears. When you select [Yes],
Time shift play is started.
When receiving i-mode mail, SMS, Message R/F
while watching 1Seg, the incoming mail display
appears. The display restores when mail reception
is completed. (When the Mail disp set is set to [OFF]
and Dur multi task disp is set to [Prefer operat.])
When the Alarm, Schedule alarm, or Booking alarm
time comes while watching 1Seg, the alarm is
displayed. The display restores when you stop the
Alarm or Schedule alarm and press
in the display informing the release of the alarm.
When you stop the Booking alarm, the screen
for confirming whether to activate 1Seg appears
depending on the setting of the Cfm. activation
(P.277) and you can activate it.
When the UIM is not inserted, you cancel the
(OK)
subscription to DoCoMo, or you temporarily
suspend using the FOMA service, you cannot
watch 1Seg.
Even when you insert the UIM for which you
subscribe to DoCoMo, you may not be able
to activate 1Seg if you repeatedly watch 1Seg
in the condition the FOMA terminal cannot
communicate such as when the FOMA terminal
is outside of the service area or in the Self mode.
In that case, try to activate 1Seg in the condition
the FOMA terminal can communicate by moving
into the FOMA service area.
When you activate 1Seg for the first time, activate
it within the FOMA service area.
Even if the data may be lost or changed as a
result of malfunction, repair, or other handling
of the FOMA terminal, under no condition will
DoCoMo be held liable for any damaged or lost
data saved in the FOMA terminal. Furthermore,
note that the saved information (such as 1Seg
recorded videos or still images, TV links, or
information saved in the broadcast storage area)
cannot be moved when you change your FOMA
terminal or have it repaired.
If you continue watching 1Seg for a long period
of time with the battery being charged, the life of
the battery pack may become shorter.
or
Advertisement
Chapters
Table of Contents
