Table of Contents
Advertisement
3
Select the method, press
the phone number.
4
Press
(V.phone).
The videophone call is dialed with a Chara-den
character set as the substitute image.
To switch between the full-body action and parts
action modes
Press
(Change).
To display the action list
From the Function menu, select [Action list].
To switch to the mode for sending touch-tones
(DTMF)
From the Function menu, select [DTMF send
mode].
To switch to the Chara-den action operating mode
From the Function menu, select [Action input
mode].
When the mode for sending touch-tones (DTMF)
is set, the Chara-den action cannot be operated.
76
, and enter
Setting the Videophone
Operation
Setting the Display to Be Used
in a Videophone Call
You can set the image to be displayed on the
videophone images (Large) and (Small) during
a videophone call.
1
From the Menu, select [Settings]
[Videophone]
press
[Main-Other side]:
Display the recipient's/caller's image on the
videophone image (Large) and your image on
the videophone image (Small).
[Main-My side]:
Display your image on the videophone image
(Large) and the recipient's/caller's image on the
videophone image (Small).
[Other side only]:
Display the recipient's/caller's image only on the
videophone image (Large).
[My side only]:
Display your image only on the videophone
image (Large).
2
Select a display method and press
The Display setting is set.
Setting a Video to Be Sent to the
Recipient/Caller
You can set whether to send a camera image
to the recipient when you place a videophone
call. You can also set an image from either My
picture or Chara-den as a substitute image if
you do not want to send a camera image.
1
From the Menu, select [Settings]
[Videophone]
and press
<Videophone setting>
[Display setting] and
.
[Set outgoing image]
.
[Call]
.
[Call]
Advertisement
Chapters
Table of Contents
