Table of Contents
Advertisement
Setting the Type of Mail/Message
to be Checked
You can set whether to receive mail, Message
R, and Message F when making inquiries to
the i-mode center.
Example: Setting the i-mode inquiry set for mail
1
From the Mail menu, select [Mail setting]
[Common setting]
set] and press
2
Select [Mail]
i-mode inquiry set.
The i-mode inquiry set is set.
Setting to Select and Receive Mail
You can set whether to selectively receive
i-mode mail.
Even if the Recv option setting is [ON], all mail is
received if you use the Check new message. If you
do not want to receive mail, set [Mail] to [Invalid] in
the i-mode inquiry set (P.208).
1
From the Mail menu, select [Mail setting]
[Recv option setting] and press
The Recv option setting display appears.
[ON]:
Sent mail is held at the i-mode center and not
received by the FOMA terminal. To receive, use
the Receive option (P.193).
[OFF]:
Sent mail is received automatically by the FOMA
terminal.
2
Select [ON]/[OFF] and press
The Recv option setting is set.
208
[i-mode inquiry
.
[Valid]/[Invalid] of the
.
.
Setting a Mail List
By saving mail addresses in a mail list, you can
send mail to all members in the list at the same
time.
Up to 10 mail lists can be saved. Up to five
mail addresses can be saved in each mail list.
1
From the Mail menu, select [Mail setting]
[Mail list]
a mail list and press
2
Enter a list name at [List].
Enter a list name within eight full-width or 16 half-
width characters.
3
Select [Member list] and press
To delete a member
Move the cursor to the member field and from
the Function menu, select [Delete]
one]
[Yes]. To delete all members, from the
Function menu, select [Delete]
enter the Security code, and select [Yes].
4
Enter the mail address or the phone
number in the member field.
Enter a mail address or phone number within 50
half-width alphanumeric characters and symbols.
5
Press
(Complete).
The member list is set.
.
.
Member field
[Delete
[Delete all],
Advertisement
Chapters
Table of Contents
