Table of Contents
Advertisement
Icons in the Camera Mode
In the Camera mode display, the following
icons appear depending on the settings and
functions selected.
You can use
(Display) to switch the display of the
icons and guide display (Standard, Key operation
guide display, or Display off). Even if you select
"Display off", related icons are displayed when you
perform any operations. Also, when switching the
display while recording/pausing a movie, the guide
display is changed to the simple display.
When recording a still image
Shoot mode (P.159)
"
" appears when recording a still image.
Photo light ON (P.153)
White balance (P.154)
For the Deco-Snap, the Auto focus (P.151) is
displayed.
Image quality (P.157)
The number of a folder to save to
Appears when saving data to/playing data from
the microSD card (does not appear when no
microSD card is inserted).
Save to (P.156)
Estimated number of images that can be recorded
If the number of images that can be recorded is
higher than 9,999, "
Image size (P.149)
Shoot mode (P.144, 145, 146, 147)
Switch camera (Out-/In-camera) (P.149)
Select scene (P.150)
EV (P.151)
Auto focus (P.151)
Photometry (P.155)
During the Auto focus operation
Auto timer ON (P.152)
Zoom (P.150)
Spot photometry (P.155)
142
When recording a movie
" appears.
Auto focus frame
Saved with this side up indication (P.149, 157)
Set attach loc. info ON (P.151)
GPS positioning accuracy (P.248)
Nearly accurate location information (with
an error less than approximately 50 m)
Relatively accurate location information (with
an error less than approximately 300 m)
Approximate location information (with an
error more than approximately 300 m)
Positioning failed
Mini-Photo creator set to [Replicate] (P.156)
Auto orientation ON (P.157)
Com. replay mode (P.154)
File size restriction (P.158)
Recording sound only
Recording status
Progress bar
Estimated recordable time
Recording Still Images
When recording with the Out-camera, you can
use the Auto focus function to focus on an
object at the center of the display and record
still images. When the Auto orientation is set
to [ON], the orientation of the FOMA terminal
is automatically detected while recording and
orientation information is recorded in the image
file.
You can also record a still image in the Media
style (P.28).
The minimum allowable distance for the Auto focus
between the camera and an object is 20 cm using
[Normal mode] and 10 cm using [Closeup mode].
You cannot use the Auto focus when you set the
Select scene to [Night scene]/[Low Light] for
recording still images.
1
Press
display.
The Camera mode is activated.
Stopped
During image recording
During image playing
During pausing
During image fast-forwarding
During image reversing
<Shoot by photo>
for over a second in the stand-by
Advertisement
Chapters
Table of Contents
