NTT docomo FOMA SO906i User Manual page 245

To delete a sorting requirement
Move the cursor to the sorting requirement
and from the Function menu, select [Delete]
[Delete one] [Yes]. To delete several sorting
requirements, from the Function menu, select
[Delete] [Select&delete], select sorting
requirements, press
[Yes]. To delete all sorting requirements, from the
Function menu, select [Delete]
enter the Security code, and select [Yes].
To reorder the sorting requirements
From the Function menu, select [Reorder]
sorting requirement, move the cursor to a folder
to move to, press
(Complete).
2
S e l e c t a p l a c e t o s av e t h e s o r t i n g
requirement to and press
3
Select the sorting method at [Sorting
criteria].
[Genre]:
Specify a genre of ToruCa cards.
[Title]:
Specify a part of a title within 10 full-width or 20
half-width characters.
[Index]:
Specify a part of an index within 10 full-width or
20 half-width characters.
[None]:
Do not specify any sorting method.
4
Select a folder to be used for sorted
ToruCa cards at [Folder to sort into] and
press .
When no folder is specified
ToruCa cards are sorted to [ToruCa].
5
Press (Complete).
The sorting requirement is saved.
If a ToruCa card satisfies several sor ting
requirements, the sorting requirement with a
lower number in the list has higher priority.
If you delete a folder for which the sorting
requirement is set, [ToruCa] is used as a sort
destination folder.
ToruCa cards received before the sor ting
requirement is set are not sorted automatically.
You cannot set [Used] as a sort destination
folder.
Only ToruCa cards obtained from the reading
device are sorted automatically.
(Complete), and select
[Delete all],
a
(Move), and press
.
Setting Whether to Automatically
Recognize a ToruCa(Detail) Card
You can set whether to let a reading device
recognize available ToruCa cards automatically
when you hold up and show the FOMA terminal
to it in order to use ToruCa.
 Up to 20 ToruCa cards are saved in [Used]. When
the number of saved cards exceeds 20, the cards
with the oldest date/time are deleted, in that order.
1
From the Menu, select [Osaifu-Keitai]
[Settings] [ToruCa setting]
recognition] and press
[ON]:
Available ToruCa cards are automatically
recognized by the reading device and saved in
[Used].
[OFF]:
Available ToruCa cards are not recognized by
the reading device.
To display the explanation about the Auto recognition
Move the cursor to [Auto recognition] and press
(Help).
2
Select [ON]/[OFF] and press
The Auto recognition is set.
When you select [ON]
Select [Yes].
If you hold up and show the FOMA terminal to
a reading device with the Auto recognition set
to [OFF], a message confirming whether to use
the Automatic reading function or stating that the
Automatic reading function is OFF may appear.
To use the Automatic reading function, select
[Yes] to set the Auto recognition to [ON].
[Auto
.
.
243
Continued