Table of Contents
Advertisement
Setting the User-defined Host
Normally, you do not need to change this
setting.
You can set one host for using the GPS service
besides the Initial host set at the time of
subscription.
1
From the Menu, select [LifeKit]
[GPS settings]
[Host setting] and press
To edit the set host
Move the cursor to the set host, press
and enter the Security code. Edit each item.
To delete the set host
Move the cursor to the set host, press
enter the Security code, and select [Yes].
To reset the host to the default setting
Select [Initial host].
2
Select [Unregistered] and press
The Security code screen appears.
3
Enter the Security code and press
(OK).
[Host name]:
E n t e r a h o s t n a m e w i t h i n 9 9 h a l f - w i d t h
alphanumeric characters and symbols.
[Host address]:
Enter a host address within 100 half-width
alphanumeric characters and symbols.
4
Enter each item.
5
Press
(Complete).
The entered host is saved.
6
Select a host and press
The user-defined host is changed.
258
[GPS]
[Loc. request menu]
.
(Edit),
(Delete),
(Edit).
.
Performing Settings for Using
the GPS Service
You can connect to the GPS service settings
site and per for m setting necessar y for
providing the location information.
1
From the Menu, select [LifeKit]
[GPS settings]
[Service settings] and press
The FOMA terminal is connected to the GPS service
settings site.
2
Set each item.
For details about how to set the services, contact
your service provider.
While you are connecting to the GPS service
settings site, available Function menus are
different from the ones displayed during i-mode.
The URL history is also not recorded.
If you connect to the GPS service settings site
during international roaming, an error message
appears on the display and a communication
charge is required.
Notifying Your Current Location
Information
You can notify a specific party (a service
provider that supports the Location notice
function) of the location information of your
current location.
To use the Location notice, you may need to
subscribe to a service provider that supports this
function. There may be a charge for the use of the
service.
To use the Location notice, follow the instructions
provided by the service provider or on the
DoCoMo's website. There is a charge for the use of
the Location notice function.
1
From the Menu, select [LifeKit]
[Location notice] and press
The screen for selecting the method for activating
the Location notice appears.
[GPS]
[Loc. request menu]
.
<Location notice>
[GPS]
.
Advertisement
Chapters
Table of Contents
