Charging The Foma Terminal - NTT docomo FOMA SO906i User Manual

Ntt docomo w-cdma/gsm/gprs system mobile phone
Table of Contents

Advertisement

Battery Pack
To make full use of the FOMA terminal, make sure to use the Battery Pack SO02.
Life of the battery pack
The battery pack is a consumable part. The usage duration of the battery per one charge
decreases gradually each time the battery is recharged. When the usage duration per one
charge becomes about half that of a new battery pack, the life of the battery pack is assumed
to be almost over. It is recommended that you replace the battery pack ahead of time.
Depending on the usage condition, the battery pack may be inflated as it comes to the end of
its life. This is not a malfunction.
If you continue using i- ppli, talking on the videophone, or watching 1Seg for a long period of
time with the battery being charged, the life of the battery pack may become shorter.
Return all spent battery packs to NTT DoCoMo or a dealer, or a recycling
shop to protect the environment.

Charging the FOMA Terminal

At the time of purchase, the battery pack is not fully charged. Make sure to fully
charge the battery pack before using the FOMA terminal for the first time.
About Charging the FOMA Terminal
 For details, see the user's manual of the FOMA AC Adapter 01/02 (optional), FOMA AC Adapter
01 for Global use (optional), or FOMA DC Adapter 01/02 (optional).
 The FOMA AC Adapter 01 is only compatible with AC 100 V. The FOMA AC Adapter 02 and
FOMA AC Adapter 01 for Global use are compatible with AC 100 V to AC 240 V.
 The shape of the AC adapter's power plug is only for use with AC 100 V (domestic
specification). For using the AC adapter which is compatible with AC 100 V to AC 240 V
overseas, a plug adapter that fits the electrical outlets in the country you stay is needed. Do not
use an electrical transformer for overseas use to charge the FOMA terminal.
 Make sure to attach the battery pack in the FOMA terminal before connecting it to the optional
AC Adapter, Desktop Holder, or DC Adapter. If the battery pack is not attached, the FOMA
terminal cannot be charged.
 If you use a function such as 1Seg, videophone, data communication, and i- ppli while
charging the battery, the charging may stop because of high temperature of the FOMA
terminal. The charging may not even start if the FOMA terminal is in high temperature. Wait until
the temperature of the FOMA terminal falls and restart charging.
 If the charge indicator of the FOMA terminal flashes in red, wait until the temperature of the
FOMA terminal falls or remove the battery pack and attach it back again.
If it continues to flash in red, the battery pack may be defective. Stop charging immediately
and contact our service counter (DoCoMo shop, etc.).
 Do not charge the battery pack for a long period of time (more than 24 hours) with the FOMA
terminal powered on. If the FOMA terminal is powered on when charging is completed, the
battery level decreases. This causes the FOMA terminal to restart charging. If you remove the
FOMA terminal while it is recharging, the following conditions may occur.
- The battery level is low.
44
- The battery alarm sounds.
- The operation time is short.

Advertisement

Table of Contents
loading

Table of Contents