NTT docomo FOMA SO906i User Manual page 101

Dialing Quickly to Frequently
Called Numbers
A call can be placed easily to the recipients
saved in memory numbers from 000 to 009 by
using a shortcut.
It is useful to save frequently used phone
numbers in memory numbers from 000 to 009.
 When the Secret data display is set to [OFF], the
2-touch dial cannot be used to place a call to a
phone number saved as Secret.
Example: Placing a call to the recipient saved in the
memory number 001
1
Enter the last one digit of the memory
number (0 to 9) in the stand-by display.
To check a recipient's data saved in a memory
number
Enter the memory number (one or two digits) and
press or . A list of used memory numbers
and their associated entries appears with the
entered memory number highlighted.
2
Press .
After about five seconds, the call is connected to
the first phone number of the recipient saved in
memory number 001.
To place a videophone call
Press (V.phone).
To send mail
Press (Mail).
To send SMS
Press (Mail) for over a second.
The call can be placed or SMS can be sent to
the recipients saved in memory numbers from
010 to 099 by entering the last two digits (10 to
99) of the memory numbers.
Storing (Restoring/Updating) the Phonebook at the
Data Security Service Center
<2-touch dial>
You can use the Data Security Service to store
the FOMA terminal phonebook at the Data
Security Service Center. You can update the
stored Phonebook by connecting to the Data
Security Service Center.
You can also set to restore the Phonebook or
update automatically from the i-mode Data
Security Service site ([
[
 For details on the Data Security Service, see the
"Mobile Phone User's Guide i-mode FOMA
version".
 Data Security Service is a paid service that requires
a subscription.
 You cannot save the UIM phonebook at the Center.
You cannot use the service when you are outside
of the i-mode service area or the FOMA terminal
is powered off.
Storing/Updating/Restoring the
Phonebook
1
From the Menu, select [LifeKit]
Security Service]
and press
The Security code screen appears.
To connect to the Data Security Service Center from
the Phonebook
2
Enter the Security code and press
(OK).
The screen for confirming whether to connect to the
Data Security Service Center appears.
3
Select [Yes] and press
The call is connected to the Data Security Service
Center and the data is updated. When the update
is completed, the update result screen appears.
 When you delete data from the Phonebook and
Menu]
] (Data Security)).
[Connect to Center]
.
From the Function menu in the Phonebook,
select [Cnct to Center].
update the Phonebook, note that the data at the
Data Security Service Center is also deleted.
<Data Security Service>
[My Menu]
[Data
.
Continued
99