Table of Contents
Advertisement
Obtaining a ToruCa Card from Data Broadcasting
Sites Automatically
You can set whether to obtain a ToruCa card
from data broadcasting/data broadcasting
sites automatically.
1
From the Menu, select [1Seg/AV]
[1Seg setting]
ToruCa] and press
[Yes]:
Obtain a ToruCa card from data broadcasting/
data broadcasting sites automatically.
[No]:
D o n o t o b t a i n a To r u C a c a rd f ro m d a t a
b r o a d c a s t i n g / d a t a b r o a d c a s t i n g s i t e s
automatically.
2
Select [Yes]/[No] and press
The Auto rcv. 1Seg ToruCa is set.
When a ToruCa card is obtained automatically
from data broadcasting/data broadcasting sites
while the Auto rcv. 1Seg ToruCa is set to [Yes],
the notification icon " " (New ToruCa) appears
in the stand-by display.
<Auto rcv. 1Seg ToruCa>
[1Seg]
[Auto rcv. 1Seg
.
.
Displaying a User's Confirmation Screen for
Data Broadcasting Site
If you select [Yes,from then on] on the screen
for confirming whether to connect to i-mode,
which appears when using data broadcasting
or data broadcasting sites, the confirmation
screen no longer appears. To display the
confirmation screen again, perform the Reset
permission set.
1
From the Menu, select [1Seg/AV]
[1Seg setting]
set] and press
.
The Security code screen appears.
2
Enter the Security code and press
(OK).
The screen for confirming whether to perform the
Reset permission set appears.
3
Select [Yes] and press
The Reset permission set is reset.
<Reset permission set>
[1Seg]
[Reset permission
.
Continued
287
Advertisement
Chapters
Table of Contents
