About Infrared Communication - NTT docomo FOMA SO906i User Manual

4
Press (Delete), select [Yes], and press
.
The selected software is deleted and then
downloading starts.
If you delete preinstalled Chara-den files, it does
not help you increase the save area.

About Infrared Communication

You can send and receive the Phonebook,
Schedule, Text memo, Bookmark, mail,
image, movie, melody, PDF data, ToruCa
card, Decome-Anime template, and Loc.
service client data to/from a mobile phone
equipped with the infrared communication
function. To send/receive all entries, you need
a 4-digit authentication password preset with a
communication target recipient/sender.
The FOMA terminal can also do much more in
conjunction with other devices equipped with
the infrared communication function by using
the infrared communication feature of i- ppli.
 There are some data that cannot be exchanged
even if the other device is equipped with the infrared
communication function.
 The infrared communication of the FOMA terminal
follows IrMC™ version 1.1. Even if the other device
follows IrMC™ version 1.1, there may be data that
cannot be exchanged properly depending on the
software.
 You cannot perform infrared communication during
a call or i-mode/packet/64K data communication, or
when the Lock all, Omakase Lock or Self mode is
set.
 During the infrared communication, the status of
the FOMA terminal is the same as the outside of the
service area status. Therefore, you cannot place a
call or perform i-mode and data communication.
 When the other device does not support IrSimple™
function, the communication speed slows.
 The infrared receiving function of the FOMA terminal
and infrared sending function of contents of the
Data Box support IrSimple™ function.
 JPEG images saved in My picture of the Data
Box/microSD can be sent by using the high-speed
infrared communication (IrSimpleShot™ function )
(P.348).
I r S i m p l e S h o t ™ f u n c t i o n i s t h e o n e - w a y
communication function (Home Appliance Profile)
that is compliant with IrSimple™ function.
<Infrared communication>
Using the Infrared
Communication
 The FOMA terminal and the other device can be
used within about 20 cm apart. The infrared data
port must be kept pointed at the other device until
the data exchange ends.
 If used under direct sunlight, fluorescent lamp
or near other infrared devices, the infrared data
exchange may not function properly.
Within about
20 cm
Infrared data
Reception angle:
port
±15 degrees off
axis
Infrared data
port
345