Table of Contents
Advertisement
1
From the Data Box, select a category and
press
.
The folder list appears.
2
Press
(Func).
The Function menu appears.
3
Select [Data security] and press
The Security code screen appears.
4
Enter the Security code and press
(OK).
The screen for selecting a security folder appears.
5
Select a folder to be locked and press
To lock all folders
Press
(Sel. all).
To unlock the selected folder
Press
(Rel.).
6
Press
(Complete).
The screen for confirming the change of the
security setting appears.
7
Select [Yes] and press
The Data security is set.
" " appears on the folder data which is set the
security.
Specifying Phone Numbers to
Accept/Reject Calls
You can set to accept/reject voice, videophone,
or PushTalk calls only from specific phone
numbers. For the Accept/Reject calls, up to 20
phone numbers can be saved (Phone No.).
You can also set to accept/reject calls only
from specific groups in the FOMA terminal
phonebook. For the Accept/Reject calls, up to
three groups can be saved (Group list).
This function is valid only when a caller sends
the phone number. It is recommended to set
the Caller ID Display Request Service and the
Denied no ID together with this function.
.
.
.
<Accept/Reject call>
SMS and i-mode mail can be received regardless of
this function.
For an incoming PushTalk call, it is only to the
caller's phone number that the Accept/Reject call
setting is valid. The Accept/Reject setting does not
work even if you set it to a member other than the
caller. When you make the Accept/Reject setting
through the Group list, a call is accepted/rejected if
the caller of it belongs to the specified group in the
FOMA terminal phonebook.
Example: Setting [Accept]/[Reject] for calls from
specified phone numbers
1
From the Menu, select [Settings]
Security]
[Acpt/Rjct call] and press
The Security code screen appears.
2
Enter the Security code and press
(OK).
3
Select [Accept]/[Reject] at [Set].
[Accept]:
Set to accept a call. When you receive a call
from a phone number/group other than specified,
the call is not connected. The missed call
notification icon appears and the call is saved in
the Received record.
[Reject]:
Set to reject a call. When you receive a call from
a specified phone number/group, the call is not
connected. The missed call notification icon
appears and the call is saved in the Received
record.
[OFF]:
Cancel the Accept/Reject call setting.
[Lock/
.
133
Continued
Advertisement
Chapters
Table of Contents
