Network Security Code; Pin Code - NTT docomo Arrows Kiss F-03E Instruction Manual

Table of Contents

Advertisement

Notes on the security codes
To set a security code, avoid imaginable numbers such
as "birth date", "a part of phone number", "street
address or room number", "1111" or "1234". Maintain a
separate record not to forget the numbers.
Be careful never to reveal your security code to others.
If a security code is misused by others, DOCOMO
assumes no responsibility for damages resulted from it.
If you forget your security codes, you need to bring a
document (a driver's license etc.) to identify your
subscription, the terminal and the docomo mini UIM
card to a docomo Shop. For details, contact "General
Inquiries" on the last page of this manual.
The PUK code is written on a subscription form (copy
for user) handed at subscription in a docomo Shop. For
users subscribed in other than docomo Shop, bring a
document (a drivers license etc.) to identify your
subscription and the docomo mini UIM card to a
docomo Shop, or contact "General Inquiries" on the last
page of this manual.

Network security code

The network security code is a 4-digit number necessary for
identification or using the docomo Network Services at
reception of your request in docomo Shop or at a docomo
Shop or docomo Information Center. It can be set any number
at the subscription and also changed later by yourself.
You can change your network security code to the new one
using the PC if you have the "docomoID/Password" for the "My
docomo" General support site for PC. If you use dmenu,
dmenu→"お客様サポートへ (To Customer support)"→You can
change them yourself from "各種お申込・お手続き(Various
application/Procedures)" (in Japanese only).
* For "My docomo", "お客様サポート (Customer support)", see P208
(for the "Instruction Manual" application, "マナーもいっしょに携
帯しましょう (Using mobile phone with your manners!)" in "付録
(Appendix)").

PIN code

Security code called as PIN code can be set in the docomo mini
UIM card. The code is set to "0000" at the time of subscription,
but you can change the number by yourself.→P108
PIN is a 4- to 8-digit number (code) that must be entered for
user confirmation to prevent unauthorized use by a third party
every time you insert the docomo mini UIM card into the
terminal or when the terminal is powered ON. Entering the PIN
code enables making/receiving calls and terminal operation.
For using the docomo mini UIM card that you have used on
another terminal by inserting to this terminal, use the set PIN
code on the former terminal. If you did not change the
setting, the code is "0000".
107
Settings

Advertisement

Table of Contents
loading

Table of Contents