Table of Contents
Advertisement
Turning the power on/off
･
When FOMA terminal is turned on for the first time, a confirmation screen appears asking whether to
perform Software Update. ☛P374
Turning the power on
Hold down f for over 2 seconds
1
The wake-up screen appears and then the standby display. The wake-up screen may take some time to
appear.
is indicated while reading the UIM and
disappears when reading is completed.
Turning the power off
Hold down f for over 2 seconds
1
INFORMATION
When you turn on the power of FOMA terminal after replacing the UIM (except when Omakase Lock (Remote Lock) is set),
●
entry of the 4 to 8-digit terminal security code is required. After entering the correct terminal security code, the standby display
appears. If a wrong terminal security code is entered 5 times consecutively, the power is turned off ( but can be turned on
again).
When you turn on FOMA terminal, the PIN1/PIN2 code entry screen appears depending on the setting (☛P128, P309).
●
Enter the PIN1 code or PIN2 code.
When Normal use of Display light time in Display Light Setting is set to other than Always, if you do not press any keys for
●
about 90 seconds, the screen display disappears. ☛P116
Switching to English display
Default Japanese
m8272
1
Press 2
2
To switch to Japanese display: 1
･
INFORMATION
This setting is saved in the UIM.
●
40
Before Using D703i
Received
Icon
signal level
(Signal level icon)
Received
signal level
･
If the date and time have not been set, a message appears
indicating that. When FOMA terminal receives the time
The standby
information and the time is automatically corrected, the message
image is
disappears. Press o to set the date and time manually.
displayed.
･
If no UIM is inserted, a message appears indicating that
insertion of the UIM is required. Turn the power off, insert the
UIM and then turn the power back on.
Strong
Weak Outside the service area
or where radio waves
are hard to reach
Power ON/OFF
Select Language
Advertisement
Chapters
Table of Contents
