MB95630H Series
21.5.4.3
At Position Detection
The output timing change, which is triggered by the input pin SNIx for the
position detection, is shown in Figure 21.5-16 and Figure 21.5-17.
■ Timing Generated by Position Detection
Figure 21.5-16 Timing Generated by Position Detection
No. 0
BNKF,
RDA2,
0b0100 0b0110 0b0010 0b0011 0b0001 0b0101 0b1010 0b1011
RDA1,
RDA0
OPT5
OPT4
OPT3
OPT2
OPT1
OPT0
SNI2
SNI1
SNI0
MN702-00009-1v0-E
No. 4
No. 6
Write signal is generated when theres is a comparison match between RDA[2:0] and
SNI2-SNI0 or any effective edge input at SNI2-SNI0. The comparison is triggered by the
input edge position detection input terminal SNIx.
FUJITSU SEMICONDUCTOR LIMITED
CHAPTER 21 MULTI-PULSE GENERATOR
No. 2
No. 3
No. 1
21.5 Operations
No. 5
No. A
407