Fujitsu MB95630H Series Hardware Manual page 540

2
CHAPTER 24 I C BUS INTERFACE
24.7 Registers
Notes:
• When clearing the interrupt request flag bit (IBCR1n:BER) by writing "0" to it, do not
update the interrupt request enable bit (IBCR1n:BEIE) at the same time.
• All bits in the IBCR1n register except the BER and BEIE bits are cleared to "0" either
when the I
occurs (IBCR1n:BER = 1).
520
2
C bus interface operation is disabled (ICCRn:EN = 0) or when a bus error
FUJITSU SEMICONDUCTOR LIMITED
MB95630H Series
MN702-00009-1v0-E