Table of Contents
Advertisement
CHAPTER 14 LIN-UART
14.6 Operations of LIN-UART and LIN-UART
Setting Procedure Example
● Communication procedure example
The communication starts from the transmit side at any time after transmit data is ready. The
receive side returns ANS (per one byte in this example) regularly after receiving transmit data.
Figure 14.6-12 is an example of bidirectional communication flow chart.
Figure 14.6-12 Example of Bidirectional Communication Flow Chart
Set operating mode
Communicate with 1-byte
NO
Read and process received
236
(Master)
Start
(0 or 2)
Data transmission
data set in TDR
Data received?
YES
Data transmission
data
FUJITSU SEMICONDUCTOR LIMITED
Set operating mode
(same as that of the master)
Data received?
NO
Read and process received
Transmit 1-byte data
(ANS)
MB95630H Series
(Slave)
Start
YES
data
MN702-00009-1v0-E
Advertisement
Table of Contents
