Fujitsu MB95630H Series Hardware Manual page 459

8-bit microcontroller new 8fx

Hide thumbs Also See for MB95630H Series:

Table of Contents

MB95630H Series

[bit1:0] OP0[1:0]: OPT0 output waveform select bits

These bits select the output waveform to the OPT0 pin.

The waveform selected is to be output to the OPT0 pin after the data in the OPDBRHx/OPDBRLx specified

in the BNKF bit and RDA[2:0] bits is loaded to the OPDUR/OPDLR register.

Writing "00"

Writing "01"

Writing "10"

Writing "11"

MN702-00009-1v0-E

Selects "L" level as the waveform to be output to the OPT0 pin.

Selects the output of the PPG timer as the waveform to be output to the OPT0 pin.

Selects the inverted output as the waveform to be output to the OPT0 pin.

Selects "H" level as the waveform to be output to the OPT0 pin.

FUJITSU SEMICONDUCTOR LIMITED

CHAPTER 21 MULTI-PULSE GENERATOR

21.6 Registers