Fluid Reservoir Tank; Fluid Reservoir Tank And Associated Parts 5C-21; Removal; Installation - Isuzu 1999 RODEO Workshop Manual

Fluid Reservoir Tank and Associated Parts
Legend
(1) Fluid Reservoir
(2) Electrical Connector

Removal

NOTE: Before removing the fluid reservoir, remove the
brake fluid from the fluid reservoir.
1. Disconnect electrical connector.
2. Remove retainer (1).
3. Remove fluid reservoir and the fluid level sensor built
into the fluid reservoir. The fluid level sensor cannot
be removed for servicing.
4. Remove O–ring.
POWER–ASSISTED BRAKE SYSTEM

Fluid Reservoir Tank

(3) O–ring
(4) Retainer

Installation

To install, follow the removal steps in the reverse order,
noting the following points:
1. O–ring (1) must be set onto the fluid reservoir (2),
before installing fluid reservoir.
330RW004
5C–21
330RW003
330RW005