Installation; Reassembly - Isuzu 1999 RODEO Workshop Manual

4. Remove harness connector.
5. Remove EHCU ASM.
6. Remove EHCU.
Disassembled View
Legend
(1) Fixing Bolts
(2) Coil Integrated Module
(3) Hydraulic Unit (H/U)
ANTI–LOCK BRAKE SYSTEM
Disassembly
1. Remove fixing bolts from EHCU.
2. Remove coil integrated module from hydraulic unit.

Reassembly

To reassembly, follow the disassembly steps in the
reverse order, noting the following points:
Torque:
Fixing bolts: 4.4 N·m (39 lb in)

Installation

To install, follow the removal steps in the reverse order,
noting the following points:
Torque:
Hydraulic unit fixing nuts : 22 N·m (16 lb ft)
Ground cable : 14 N·m (10 lb ft)
Brake pipe (joint bolts) : 16 N·m (12 lb ft)
f After installing the hydraulic unit, bleed brakes
completely. See Section 5A "Hydraulic Brakes".
350RW025
5B–3