Disassembly
NOTE: For the left side, follow the same steps as right
side.
1. Raise the hooked end of the band with a screwdriver
or equivalent.
2. Remove band(1).
3. Pry off circlip (1) with a screwdriver or equivalent.
4. Remove drive shaft joint assembly.
5. Remove the six balls (1) with a screwdriver or
equivalent.
6. Using snap ring pliers, remove the snap ring (1)
fastening the ball retainer to the center shaft.
412RS009
412RS010
DRIVE SHAFT SYSTEM
4C–15
412RS012
412RS013