Reassembly - Isuzu 1999 RODEO Workshop Manual

4C–10
DRIVE SHAFT SYSTEM

Reassembly

1. Install wheel pin.
f Place the hub on a wood workbench or a block of
wood approx. 6" by 6" to protect the wheel stud
ends and threads.
f Insert a wheel stud using a hammer.
Be sure the wheel stud is started squarely and
seats completely.
2. Align scribe marks(1) and attach the hub to the disc,
then tighten the bolts to the specified torque.
Torque: 103 N·m (76 lb ft)
3. Use installer J–36829 and grip J–8092, then install
the inner bearing by driving it into the hub.
4. Use installer J–36828 and grip J–8092 then install the
outer bearing by driving it into the hub.
411RS005
411RS003
901RW055
901RW056