Axle Housing; Axle Housing And Associated Parts; Removal - Isuzu 1999 RODEO Workshop Manual

Axle Housing and Associated Parts

Legend
(1) Lower Link
(2) Stabilizer
(3) Upper Link
(4) Rear Propeller shaft
(5) Shock Absorber

Removal

1. Raise the vehicle and support it with suitable safety
stands.
The hoist must remain under the rear axle housing.
2. Take out brake fluid. Refer to Hydraulic Brakes in
Brake section.
3. Remove rear wheels and tires.
Replacement in Suspension section.
4. Remove propeller shaft. Refer to Rear Propeller
Shaft in this section.
5. Drain the rear axle oil into a proper container.
6. Remove parking brake cable, release the connection
between the cable fixing clip equalizer. Refer to
Parking Brakes in Brake section.
7. Move the clip aside and pull out the breather hose.
8. Disconnect the ABS connectors (1) and remove the
brackets attached to the frame and center link.

Axle Housing

(6) Lateral Rod
(7) Brake Hose
(8) Coil Spring
(9) Parking Cable
(10) Axle Assembly
Refer to Wheel
DIFFERENTIAL (REAR) 4A2–5
420RW030
350RW023