Coil Spring; Coil Spring And Associated Parts; Removal - Isuzu 1999 RODEO Workshop Manual

Coil Spring and Associated Parts

Legend
(1) Stabilizer Bar
(2) Upper Link Fixing Bolt and Nut
(3) Rubber Plate

Removal

1. Raise the vehicle and support the frame with suitable
safety stands.
2. Support the rear axle case with a jack.
3. Disconnect brake hose at the crossmember.
4. Remove breather hose.
5. Remove upper link fixing bolt, nut and rubber plate on
the rear axle case (left-side only).

Coil Spring

(4) Coil Spring
(5) Insulator
(6) Shock Absorbar
(7) Breather Hose
6. Disconnect the stabilizer bar at the stabilizer link.
7. Remove the shock absorber from the axle case.
8. Remove spring insulator.
9. Remove the insulator and coil spring while lowering
the rear axle case.
CAUTION: Be sure not to let the brake hose, parking
brake cable, and breather hose extend to their full
length.
REAR SUSPENSION 3D–5
460RW003