Select: (Main) Menu - Comtech EF Data SLM-5650A Installation And Operation Manual

SLM-5650A Satellite Modem
Front Panel Operation
5.1.3.2 Opening Screen
The front panel menu screens provide the visual means to fully control and monitor operation of
the SLM-5650A. The first screen to display, after the modem power switch is turned on, is the
read-only opening screen:
Comtech SLM-5650A Modem
Firmware Version x.x.x
The top line identifies the product and its operational state. The bottom line displays the currently
running firmware version, and the selected mode of operation. Press any key to continue to the
SELECT: (Main) menu screen.
The user must first go to CONFIG: MODE to set the MODEM type, the
FREQBAND, and the INTERFACE type before proceeding with the rest of the
modem configuration.
5.2

SELECT: (Main) Menu

SELECT: Configure
The menu matrix on the next page identifies the content section in this chapter for each menu
branch, and the functional description and available settings for each branch submenu.
Use the arrow keys to select any menu branch, and then press [ENT].
SELECT: Branch
Configure
Monitor
Test
Save/Load
Utility
Monitor
Save/Load Utility
Description
Select to fully configure the modem.
Select to monitor the alarm status of the modem, to view the log of stored events, and
to display the Receive Parameters screen and clear all stored faults.
Select to configure the modem into one of several Test modes.
Select to save and retrieve up to 10 different modem configurations.
Select to perform miscellaneous functions, such as setting the Real-Time Clock,
adjusting the display brightness, etc.
5–5
State: GO
Mode: TURBO
Test
(E)
Revision 8
MN-SLM5650A