Comtech EF Data SLM-5650A Installation And Operation Manual page 127

SLM-5650A Satellite Modem
Front Panel Operation
5.2.7.7 Utility: Alarm
Audible Alarm: Disable
Use the arrow keys to either Disable or Enable the alarm, and then press [ENT].
5.2.7.8 Utility: PwrCal
Burst L-Band Pwer Cal: The modem will
Be (re)calibrated. Continue?
To execute calibration of the L-Band board for burst operation, use the  arrow keys to select
Yes, and then press [ENT].
5.2.7.9 Utility: Firmware
Firmware Images: Information
Use the  arrow keys to select Information or Select, and then press [ENT].
Item
Information
Select
Utility: Firmware
Firmware Info: Bootrom
Use the  arrow keys to select Bootrom, Image#1, or Image#2 to view information on the
firmware and software used by the modem.
Utility: Firmware
Bootrom:
FW-0000029-
This screen displays the Bootrom release date, the Firmware number and the revision number.
Press [ENT] or [CLR] to return to the previous menu.
Select
Description
View information on the firmware residing in the Bootrom, Image#1, or Image#2 slots.
Select which image (Active Image) will be loaded into the modem: #1 or #2.
Information

Image#2
Information

10/18/07
1.1.1
Enable
(E)
No Yes
(E)
Image#1
(E)
Bootrom

5–45
Revision 8
MN-SLM5650A