Opening Screen; Select: (Main) Menu - Comtech EF Data CDM-710G Installation And Operation Manual

CDM-710G High-Speed Satellite Modem
Front Panel Operation
6.2

Opening Screen

For purposes of this documentation, a CDM-710GL (L-Band) unit is shown; the
unit in use could be either a CDM-710G or CDM-710GL High-Speed Satellite
Modem.
IMPORTANT
6.3

SELECT: (Main) Menu

SELECT: Config
Test Info Save/Load Util
Move the cursor to the desired choice using the
following table describes the function of each menu branch (along with the section in this chapter
that provides information on that branch and its accompanying submenus):
MENU BRANCH DESCRIPTION
SELECTION
(Configuration) Provides the user selections for the desired Interface, Transmit, and
Config
Receive operations
Permits the user to monitor the alarm status of the unit, to view the log of stored events,
Monitor
and to display the Receive Parameters screen.
Permits the user to configure the modem into one of several Test modes; e.g., CW and
Test
Loopback
(Information) Provides a summary/display of the Interface, Transmit, Receive, and M&C
Info
configurations.
Permits the user to save and retrieve up to 10 different modem configurations.
Save/Load
(Utility) Permits the user to perform miscellaneous functions, such as setting the Real-
Util
Time Clock, adjusting the display brightness, etc.
The opening 'welcome screen' shown here is
representative of what displays whenever power is
first applied to the unit (the Firmware Version
may differ). Pressing any key takes the user to the
top-level Select menu.
Monitor
6–6
arrow keys, then press
Revision 1
MN-CDM710G
. The
ENTER