C.6.8 Gigabit Ethernet Interface Commands / Queries - Comtech EF Data SLM-5650A Installation And Operation Manual

SLM-5650A Satellite Modem
Appendix C
C.6.8 Gigabit Ethernet Interface Commands / Queries
The instruction codes that follow are valid only when the optional 10/100/1000 BaseT Gigabit Ethernet Interface Module is installed in the
SLM-5650A Satellite Modem.
Command Arguments for
Parameter (Instruction
Type Code and
Qualifier)
GigaBit GIP= 18 bytes
Ethernet
Interface
Management IP
Address and
Range
Command or
Response to
Query
Command or Query.
Used to set the IP address and network prefix for the GigaBit Ethernet Interface
Management port, in the form aaa.bbb.ccc.ddd.ee, where:
aaa.bbb.ccc.ddd = IP address, and
ee = network prefix (0-31)
Example: 010.006.030.001.24
Description of Arguments
C–39
Revision 8
MN-SLM5650A
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
N/A GIP? GIP=aaa.bbb.ccc.
ddd.ee
(see Description
of Arguments)