C.6.10 Transec Interface Commands / Queries - Comtech EF Data SLM-5650A Installation And Operation Manual

SLM-5650A Satellite Modem
Appendix C

C.6.10 TRANSEC Interface Commands / Queries

The instruction codes that follow are valid only when the optional TRANSEC Interface Module is installed in the SLM-5650A Satellite Modem.
Command Arguments for
Parameter (Instruction
Type Code and
Qualifier)
Transec SMG= 15 bytes
Ethernet
Interface
Gateway IP
Address
Transec SMI= 18 bytes
Ethernet
Interface
Management IP
Address and
Range
Command or
Response to
Query
Command or Query.
Used to set the Gateway IP address for the Transec Management port in the form
aaa.bbb.ccc.ddd, where:
aaa.bbb.ccc.ddd = IP address
Example: 010.006.030.001
Command or Query.
Used to set the IP address and network prefix for the Transec Management port in
the form aaa.bbb.ccc.ddd.ee, where:
aaa.bbb.ccc.ddd = IP address, and
ee = network prefix (0-31)
Example: 010.006.030.001.24
Description of Arguments
C–42
Revision 8
MN-SLM5650A
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
N/A SMG? SMG=aaa.bbb.cc
c.ddd
(see Description
of Arguments)
N/A SMI? SMI=aaa.bbb.ccc
.ddd.ee
(see Description
of Arguments)